Benefits
• Highly effective sealing for rims
• Long lasting, dirt resistant effect
• Reduces adherence of brake dust
Shop
Rim Sealing
Nanosunco Rim Sealing is a highly effective coating for rims based on nanotechnology. Rim Sealing generates a very good roll-off condition of diluted and oily liquids. It facilitates the removing of staining from car and motorcycle rims and reduces adherence of brake dust
Use
Rims of all types of cars and Motorcycle
Specifications
Drying/Hardening: Drying after about 60 minutes. Fully hardened after 24 hours.
Processing Temperature: +5°C to +25°C, protect from direct sunlight and frost.
Storage: Keep in +5°C to +25°C.
Only keep in original container, tightly closed, protected from direct sunlight, heating or overheating and frost.
Caution:
The application should be checked at an inconspicuous spot or a sample surface.
The wearing of gloves is recommended to avoid leaving fingerprints.
Do not apply on hot surfaces or coarse synthetic parts, such as bumpers, etc.!
Keep out of reach of children.
Preparation and Application
The surface must be clean, dry and grease-free prior refinement. Clean the surface with Grey Giant Sponge . Then afterwards in order to remove tenside residue. Test the application on an unobtrusive spot or sample surface.
Apply Nanosunco Rim Sealing through spaying, wait for about 1 minute and then furbish with cloth. The effect emerges approx. 30 minutes after furbishing.
After 24 hours Have water run on the treated surface in order to test successful application: the water should form drops on the entire surface, but not an even coat.
If temporary effect weakens, you may refresh the application following the instruction of first time treatment.
Important: Allow hardening for at least 24 hours. Do not manually or mechanically wash or treat the rims during that period of time, as the effect might otherwise disappear.
Applied Quantity
Cleaner : 15-20 ml per sqm
Rim Sealing: 15-20 ml per sqm
Durability
Approx. 20 000 Km or 1 year.
