Coarse polishing compound, Polishing Paste 1500, is the heavily abrasive machine polish for quick reconditioning of heavily weathered paintwork, removing paint overspray and sanding traces to P2000 grain.
• Paintwork of cars
• Commercial vehicles
• Motor cycles, etc.
Not suitable for scratch-resistant paint.
Shake before using.
Protect against frost and excessive heat.
Before using, check suitability and compatibility.
Do not use on hot surfaces.
Apply Polishing Paste to the polishing pad (hard white polishing pad or medium hard yellow polishing pad) and polish the pre-cleaned surface crosswise with max. 2.000 rpm. The cleaning effect can be varied with pressure, polishing pad and speed. At the start of the polishing process we recommend applying greater pressure at a lower speed. Then gradually reduce the pressure and finish off at a higher speed. Polish residues can be removed easily with our ultrasound cut Profi microfibre cloth 7. Streaks or traces of polisher removed with our Antihologramme polish 3000.