Benefits
• Highly effective anti fog coating
• For car surfaces of glass
• Easy to clean after application
Shop
Car Glass sealing AntiFog
Nanosunco AntiFog Glass is a coating material for glass with antifog effect. Suitable for surfaces of glass in car such as windows, mirrors, etc.
Use
All Car interior glass surfaces and mirrors
Specifications
Hardening/Drying: Approx. 1-2 minutes , will be hardened after 24 hours.
Storage Temperature: +5°C till +25°C
Protect from direct sunlight and frost; store well locked in original trade unit.
Processing Temperature: +5°C till +25°C
Protect from direct sunlight.
Do not use it below +5°C
Caution: To avoid dehydration of skin, we recommend the use of protective gloves during sealing. Keep out of reach of children.
Preparation and Application
Test the application on an unobtrusive spot or sample surface. The surface must be free from dirt, oily and greasy staining. Clean the surface with Grey Giant sponge and then clean the sponge residues . Afterwards, clean the surface with Nanosunco cleaner and a piece of cloth. Rinse with plenty of water afterwards. The surface must be clean, dry and grease-free prior coating.
Test the cleanliness of surface by sprinkling water on it. The water should form an even coat on the stove but not drops. Forming drops clearly indicate existing staining by oily and silicone substances or residue from previous coatings.
Spray a small amount of Nanosunco AntiFog Glass on the surface and furbish with Cloth .
The coat will have dried up after a short time (approx. 1 to 2 minutes). If you notice cords after drying, you might have applied too much of the product. Immediately repeating the coating with less coating material will remove the cords and allow for a clear view.
Applied Quantity
Cleaner : Approx. 15- 20 ml per sqm
Glass sealing Antifog : 15 -20 ml per sqm
Durability
4 – 6 month
