Benefits
• Highly efficient refinement
• Application on all vehicle surfaces made of Glass
• Water and oil repellant features
Shop
Car Glass Sealing
Car Glass Sealing is a highly effective coating material for any vehicle surfaces made of glass. It facilitates the removing of dirt, insects and icing. The coating will improve the view during rain significantly, the windscreen washer system will be used less frequently.
The refinement generates an ultra thin coat, which is not visible on the surface.
Uses
All glass surfaces of vehicles
Specifications
Hardening/Drying: At least 1 hour; refinement will be completely hardened after 24 hours.
Processing Temperature:+5°C till +30°C
Protect from direct sunlight and frost.
Storage Temperature:+5°C till +30°C
Store hermetically sealed in original trade unit; protect from direct sunlight and frost.
Caution: In order to avoid dehydration of skin, we recommend the use of protective gloves during refinement.
Environmental Impact: Solvents volatilize faster under conditions of high humidity, direct sunlight and temperatures above 20 °C. Treat smaller surface sections only.
Preparation and Application
Glass surfaces and all adjoining components, such as window seals, synthetic and car body part, must be entirely dry and clean. A preliminary cleaning is necessary, in order to achieve best results.
Apply Grey Giant Sponge to clean the subsurface and rinse with water. Cleaning the surface afterwards with Nanosunco Cleaner will result in a residue-free surface, which will significantly advance the durability of Nanosunco Car Glass Sealing.
Test the cleanliness of surface by sprinkling water on it. The water should form an even coat on the stove but not drops. Forming drops clearly indicate existing staining by oily and silicone substances or residue from previous coatings.
Spray Nanosunco Car Glass Sealing on 30×30 cm sections and quickly furbish with circling movements using the Application Cloth. Allow overlapping sections in order to avoid bad spots. You may remove grey films (excess of material) by evenly furbishing with the Application Cloth. After furbishing, the glass surface will look brilliant and clear.
Test of the surface after application :
After 24 hours, Have water run on the treated surface in order to test successful application: the water should form drops on the entire surface, but not an even coat.
If temporary effect weakens, you may refresh the application following the instruction of first time treatment.
Cleaning the coated surface: Clean with Nanosunco Grey Giant and Nanosunco Cleaner, when roll-off effect weakens. Afterwards, repeat refinement as described above.
Applied Quantitiy
Cleaner: 15- 20 ml per sqm
Car Glass Sealing :15- 20 ml per sqm
Durability
Approx. 20 000 km or 1 year
